Piping

Piping.jpg 

For the production of our coil unit,we adopt two processes as Medium Frequency induction heating and cold bending.The bend-diameter and spacing can accoding the clients' requirements.

Main materials: carbon steel, low temperature steel, alloy steel, stainless steel, ambisense steel, two phases steel,Titanium-nickel alloy, copper-aluminium,etc.

Production specification: DN25 DN200

Schedule ranges: Sch10 Sch160

Manifold is one of the typical products which researched and developed by ourselves. To manufacture the bend and straight pipes,we all adopt the process of dydraulic hot-acrosomal towing.The geometric dimensions are accurate,the height of the bracket is high,and the wall thickness is grid.

Main materials: carbon steel, low temperature steel, alloy steel, stainless steel, ambisense steel, two phases steel,etc.

Production specification: DN150 DN1500

Schedule ranges: Sch10 Sch160

Bends of our company are adopted the manufacturial process of Medium Frequency induction heated, water colded forming.

Main materials: carbon steel, low temperature steel, alloy steel, stainless steel, ambisense steel, two phases steel,

Titanium-nickel alloy, copper-aluminium,etc.

Production specification: DN40 DN600

Schedule ranges: Sch10 to Sch160

Pipes & Tubes Seamless, EFW, ERW, DSAW and Forged

Sizes available: 1/8" through to 64" Nominal Bore.

Wall thickness:1mm through to 4".

Material Grades :

Stainless Steel A312 304/L, 310, 316/L, 321/H, 347/H, 410, 440, 904L.

Carbon Steel A106Gr.B/C, A179, API 5L Gr.B.

Dimensions :

All pipe is made and controlled to the relevant standards such as:

ASME, ASTM, BS, DIN/WERKSTOFFE.




TEL: 0086 317 2186001 FAX: 0086 317 3067698